YeaLink IP Phones
"Headset Out of Range" Error on Yealink Headset
This error message typically indicates that your Yealink headset (like the WH62/WH63) has lost its connection to the charging base. Here's what you need to do: Troubleshooting Steps Re-pair the headset and base: Remove the headset from the charging ...
Connect Your Yealink T5X Phone to Wi-Fi
Requirements Yealink T5X Series IP Phone Compatible Wi-Fi USB Dongle (if your phone does not have built-in Wi-Fi) Wi-Fi Network Name (SSID) Wi-Fi Password Instructions Check for Built-in Wi-Fi: Consult your Yealink T5X phone's manual or ...
Enabling and Disabling Call Forwarding on Yealink T4 Series Handset
This guide explains how to enable and disable the Call Forwarding (sometimes referred to as call divert) feature on YeaLink T4 Series phones. Call Forwarding can also we setup (and works if the phone is offline, via VentureTel.app - see instructions ...
Manually configuring the provisioning URL of YeaLink IP phones
Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address. If however, the phone ...
How do I retrieve my IP address of my Yealink DECT Base Station?
Using either the Yealink W52P or W56P Handset - do the following: Pickup one of the Handsets that is registered to the base station. Click OK Click OK on the (i) Icon Click OK on the BASE option The IP address of the Base will be displayed on the ...
How to enable/disable call waiting tone on YeaLink
Press the “Menu” button on the phone Choose the “Features” option Select “Call Waiting” Choose option “2. Call Tone” Set to “Enable” to enable tones, or set to “Disable” to turn off Save