QoS Testing

This walk-through will take you through the steps required to run a connection test (VoIP, Speed etc.) using the Visualware BCS.

Download and Install the BCS

Download the BCS from here.

Follow the installation instructions for the platform you're using (Windows | Mac).

Running a Test

Once the BCS has been installed and is running correctly you should be able to run a connection test.

To run a test from the Visualware Connection Test Portal click here and choose a location. 

The best location to test against for VentureTel VoIP is San Jose or Los Angeles if you are closer to the West Coast or New York, if closer to the East Coast).

• Related Articles

• Testing and Understanding Your VentureTel E911 Service

  Importance of Accurate E911 Information Maintaining accurate E911 location information is crucial for prompt emergency response. Always keep your address updated in VentureTel's system. How to Test Your E911 Address Do NOT dial 911 for testing. This ...

• SonicWall firewall VoIP configuration

  The default firewall settings on SonicWall firewalls may cause issues with VentureTel VoIP traffic.  Some issues you may see are: Problems with phone registrations Dropped calls Phones not ringing One-way audio The TZ400 is an exception to this ...

• Disabling SIP ALG

  Disabling SIP-ALG is an essential part of setting QoS on a router and optimizing it for your VentureTel service. Many ALGs (including Cisco's) have bugs which cause call flow and registration failures. Some ALGs (including Cisco's) intermittently ...