Manually configuring the provisioning URL of YeaLink IP phones

Manually configuring the provisioning URL of YeaLink IP phones

Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.   
If however, the phone was not purchased through VentureTel or our partners, then you will need to manually configure the provisioning URL.  

To do this : 

  1. Login to the phone by entering the IP address of the phone in your web browser. 
  2. Go to settings -> Then select Auto Provision on the left
  3. Enter the server URL: 

  4. Be sure to  Confirm  at the bottom of the screen.  
  5. After confirming the addition of the server url, and you've created the device with it's MAC address in the VentureTel portal restart the phone or select Auto Provision on the auto provision page.


    • Related Articles

    • Manually Configure Auto Provisioning On Grandstream IP Phones

      Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.   If however, the phone ...
    • Configuring provisioning URL of Polycom phones

      To setup and enable supported Polycom phones to automatically provision with your VentureTel settings, start by: Find the IP address of the phone and login using https://{IP address} The default password is 456. Go to Settings > Provisioning Server - ...
    • Connecting Yealink phones to Wi-Fi

      This article provides instructions on how you can connect compatible Yealink phones to a wireless network using the Yealink USB Wi-Fi dongle WF40 and WF50. The Yealink WF40 is a USB dongle that allows compatible Yealink phones a quick and easy way to ...
    • How do I retrieve my IP address of my Yealink DECT Base Station?

      Using either the Yealink W52P or W56P Handset - do the following: Pickup one of the Handsets that is registered to the base station. Click OK Click OK on the (i) Icon Click OK on the BASE option The IP address of the Base will be displayed on the ...
    • Connect Your Yealink T5X Phone to Wi-Fi

      Requirements Yealink T5X Series IP Phone Compatible Wi-Fi USB Dongle (if your phone does not have built-in Wi-Fi) Wi-Fi Network Name (SSID) Wi-Fi Password Instructions Check for Built-in Wi-Fi: Consult your Yealink T5X phone's manual or ...