Manually Configure Auto Provisioning On Grandstream IP Phones

Manually Configure Auto Provisioning On Grandstream IP Phones

Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.  
If however, the phone was not purchased through VentureTel or our partners, then you will need to manually configure the provisioning URL.  

To do this :

  1. Login to the phone by entering the IP address of the phone in your web browser.
  2. Go to Maintenance -> Upgrade and Provisioning
  3. Enter the Config Server Path: 
    • p.venturetel.co/kazoo-provision/prov/grandstream
  4. Enter the Config File Postfix:
    • ?pass=complexpass
    • (where ' complexpass ' is the password - this password can be found in your VentureTel portal).

  5. Once you've saved and applied your changes and created the device in your venturetel portal with it's associated MAC address, either reboot your phone or select Provision from the top of the screen and your phone will reboot and auto provision.


    • Related Articles

    • Manually configuring the provisioning URL of YeaLink IP phones

      Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.    If however, the phone ...

    • Configuring provisioning URL of Polycom phones

      To setup and enable supported Polycom phones to automatically provision with your VentureTel settings, start by: Find the IP address of the phone and login using https://{IP address} The default password is 456. Go to Settings > Provisioning Server - ...

    • 3-way (conference) call on Grandstream Phones

      You can start a 3-way conference call from most Grandstream phones by simply pressing the conference button on your phone when it is time to bring in the third party. (The button has an icon that looks like three people on it.)   Once you have ...

    • Manually configure Zoiper soft phone on mobile

      To manually configure the Zoiper soft phone on your mobile device, start by creating a new soft phone device in the  control panel  and attach it to the appropriate user account. You'll need the SIP Username, SIP Password of the device and Realm for ...

    • Manually Configure GS Wave App (iOS/Android)

      GS Wave is a free soft phone (developed by Grandstream) that allows a user to make and receive calls from the smart phone as if they were calling from the office.  Using the GS Wave app with your VentureTel account will allow you to make calls from ...