How to Configure Follow Me Settings
Follow Me is a setting that will allow phone calls to begin forwarding to other phones when away from the office. So you can setup your cell phone to only ring if a call is not answered at the office within a specified time limit.
Setting up Follow Me:
- Click Account Settings (Gear icon), then Follow me/Find me tab and toggle the switch to on.
- For the phones you would like to delay ringing, toggle on Do Not Ring, then set the duration you would like it to wait to begin ringing.
In this example "test1" will only ring for 23 seconds, then "zac" will begin ringing at 15 seconds and go all the way up to 120 seconds.
Related Articles
Add/Edit Cell Phone to Follow Me
To add or edit a cell phone on the follow me settings do the following Click Account Settings (Gear icon), then Follow me/Find me tab Click "Add a Cell Phone" Add the device name and phone number for the cell phone you'd like to add and hit Save ...Manually configure Zoiper soft phone on mobile
To manually configure the Zoiper soft phone on your mobile device, start by creating a new soft phone device in the control panel and attach it to the appropriate user account. You'll need the SIP Username, SIP Password of the device and Realm for ...Configure Cisco RV325 for VoIP
The default firewall settings on Cisco routers have SIP ALG and SPI (Stateful Packet Inspection) enabled, which can cause issues with cloud based VoIP. Firewall Configuration Go to System Summary and ensure that the firmware is up to date ...Manually Configure GS Wave App (iOS/Android)
GS Wave is a free soft phone (developed by Grandstream) that allows a user to make and receive calls from the smart phone as if they were calling from the office. Using the GS Wave app with your VentureTel account will allow you to make calls from ...Manually Configure Auto Provisioning On Grandstream IP Phones
Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address. If however, the phone ...