How do I retrieve my IP address of my Yealink DECT Base Station?

How do I retrieve my IP address of my Yealink DECT Base Station?

Using either the Yealink W52P or W56P Handset - do the following:

  1. Pickup one of the Handsets that is registered to the base station.
  2. Click OK
  3. Click OK on the (i) Icon
  4. Click OK on the BASE option
  5. The IP address of the Base will be displayed on the screen.

    • Related Articles

    • Manually configuring the provisioning URL of YeaLink IP phones

      Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.    If however, the phone ...

    • "Headset Out of Range" Error on Yealink Headset

      This error message typically indicates that your Yealink headset (like the WH62/WH63) has lost its connection to the charging base. Here's what you need to do: Troubleshooting Steps Re-pair the headset and base: Remove the headset from the charging ...

    • Manually Configure Auto Provisioning On Grandstream IP Phones

      Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.   If however, the phone ...

    • Connect Your Yealink T5X Phone to Wi-Fi

      Requirements Yealink T5X Series IP Phone Compatible Wi-Fi USB Dongle (if your phone does not have built-in Wi-Fi) Wi-Fi Network Name (SSID) Wi-Fi Password Instructions Check for Built-in Wi-Fi: Consult your Yealink T5X phone's manual or ...

    • How to Setup Your e911 Address

      You'll need to setup your e911 address so in case of emergency first responders can have the address from where you are calling when calling from an internet phone. If you have multiple office locations, each office should be configured to utilize a ...