Configuring provisioning URL of Polycom phones

Configuring provisioning URL of Polycom phones

To setup and enable supported Polycom phones to automatically provision with your VentureTel settings, start by:

  1. Find the IP address of the phone and login using https://{IP address}
    • The default password is 456.
  2. Go to Settings > Provisioning Server - and set the following
    • Server Type: HTTPS
    • Server Address: p.venturetel.co/kazoo-provision/prov/polycom/{provisioning pass} (Where {provisioning pass} is your provisioning password found in https://control.venturel.co).
    • Tag SN to UA: Enabled
    • Leave all other fields alone and save and then reboot the phone.

After rebooting the phone, it should pull down the provisioning details of the device from VentureTel's provisioning servers.


    • Related Articles

    • Manually configuring the provisioning URL of YeaLink IP phones

      Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.    If however, the phone ...

    • Manually Configure Auto Provisioning On Grandstream IP Phones

      Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address.   If however, the phone ...

    • Connecting Yealink phones to Wi-Fi

      This article provides instructions on how you can connect compatible Yealink phones to a wireless network using the Yealink USB Wi-Fi dongle WF40 and WF50. The Yealink WF40 is a USB dongle that allows compatible Yealink phones a quick and easy way to ...

    • Configuring Fortigate Firewall for VentureTel service

      There are issues with the NAT configuration on Fortigate Firewalls, while the Firewall is supported, users with these devices will likely run into the following issues using a phone behind a Fortigate: Dropped calls One way or no way audio  Potential ...

    • 3-way (conference) call on Grandstream Phones

      You can start a 3-way conference call from most Grandstream phones by simply pressing the conference button on your phone when it is time to bring in the third party. (The button has an icon that looks like three people on it.)   Once you have ...