Configuring ASUS Router for VentureTel VoIP

1. Navigate to Advanced Settings > WAN > NAT Passthrough.
2. Next to RTSP Passthrough, select Disable.
3. Next to SIP Passthrough, select Disable.
4. Click Apply.

• Related Articles

• Configuring Dell Sonic Wall for VentureTel VoIP

  Step 1: Go to VoIP > Settings.  Step 2: Check Enable Consistent NAT, uncheck/disable everything else. Step 3: Click  Accept to save the settings.

• Configuring Fortigate Firewall for VentureTel service

  There are issues with the NAT configuration on Fortigate Firewalls, while the Firewall is supported, users with these devices will likely run into the following issues using a phone behind a Fortigate: Dropped calls One way or no way audio  Potential ...

• SonicWall firewall VoIP configuration

  The default firewall settings on SonicWall firewalls may cause issues with VentureTel VoIP traffic.  Some issues you may see are: Problems with phone registrations Dropped calls Phones not ringing One-way audio The TZ400 is an exception to this ...

• VoIP Phone Troubleshooting - Start with a Reboot

  Problem Are you experiencing issues with your VentureTel.net VoIP phone service? It might be something as simple as needing to reboot your phone. Solution Often, a quick reboot of your VoIP phone can resolve minor glitches that may be causing issues ...

• Adjusting Netgear Routers to Support VoIP

  Netgear ships their routers so that out of the box they rewrite SIP (VoIP) packets due to their stateful packet inspection (SPI) firewall & SIP ALG.  However, Netgerrs implementation of the SPI firewall and SIP ALG breaks the connection between VoIP ...