3-way (conference) call on Grandstream Phones
You can start a 3-way conference call from most Grandstream phones by simply pressing the conference button on your phone when it is time to bring in the third party. (The button has an icon that looks like three people on it.)
Once you have pressed the conference button it will bring up the conference dialing screen. From there, dial the third party number and press send! As soon as you have the third party on the line you can then press the Conf/Call softkey to initiate the 3-way conference!
Pickup another ringing extension (AKA Directed Call Pickup)
To enable this feature first open a support ticket to enable the feature code on your account. Directed call pickup allows a user to pick up an incoming phone call on another user’s extension using a feature access code. To pickup a call ringing on ...
Manually Configure Auto Provisioning On Grandstream IP Phones
Phones that are purchased through VentureTel are pre-configured to connect to our provisioning system so when plugged in and connected to the internet they will pull down the appropriate configuration for their MAC address. If however, the phone ...
Connecting Yealink phones to Wi-Fi
This article provides instructions on how you can connect compatible Yealink phones to a wireless network using the Yealink USB Wi-Fi dongle WF40 and WF50. The Yealink WF40 is a USB dongle that allows compatible Yealink phones a quick and easy way to ...
Initiating a call from the SMS Texting App
We've added the ability to initiate a call through your cell phone (without using a soft phone or LTE service) from your office number, we call this a "Quick Call". What's a Quick Call? A quick call can be made to any of your devices not just your ...
Enabling and Disabling Call Forwarding on Yealink T4 Series Handset
This guide explains how to enable and disable the Call Forwarding (sometimes referred to as call divert) feature on YeaLink T4 Series phones. Call Forwarding can also we setup (and works if the phone is offline, via VentureTel.app - see instructions ...